Aqueous specially engineered copolymer emulsion Appearance Light purplepourable liquid Brookfield Viscosity LVF (CPS) SP.1, 12RPM at 25 °C20 100pH at 25 °C 10.5 ± 0.5Eliminates need for hacking on allRCC structures Greatly reduces water pene trationinto the RCC structures Impart excellent bonding between plaster and new/old concreteProvides excellent bonding forgypsum Resistant to sulfates, alkalis, chlorides Sufficient opentime/ user friendliness Suitable for interior and exterior applications Coverage – 15 m2/L (on a smooth surface when applied with brush/roller or spray)Bond strength – 5.0 N/mm2(ASTM C 1042 – by Slant Shear method)Impart excellent bonding between plaster and new/old concrete Apcotex Industries LimitedPlot No. 3/1, Taloja MIDCDist. Raigad – 410 208Maharashtra, 720 is specially engineered copolymer emulsion that bypass anysurface preparation procedure like hacking, cementwater application, etc., andreinforce the bonding of plaster with new/old concrete.It is used as concrete bonding agent with plaster and gypsum. It dries toform a tacky coating, unaffected by alkalinity of cement and gypsum. Onapplication, TSN 720 strengthens the bonding strength substantially andis not influenced by moisture allowing for use of TSN 720 on both interiorand exterior applications.Remove all the loose or disintegrated concrete, dust, oil, or any otherforeign material. On a clean surface, apply a coat of TSN 720, either withbrush/roller or spray. Allow to dry until tacky to touch (may take 1020minutes, depending upon the relative humidity). When surface becomesufficient tacky, apply a chat/ dashcoat of cement mortar in such a waythat a thin layer should form. Do not apply a chat/ dashcoat, if thesufficient tackiness is not developed. In that case, one may apply asecond coat of TSN 720 (The reason is some substrates are porous andmay need more material). After the settling of chat/ dashcoat, applyplaster or concrete in a usual manner.SIX months from the date of manufacturing when stored at 5 to 40 oC ina properly closed original container, in a cool and dry place, away fromdirect sunlight. Protect from freezing.Though no direct hazard is known, avoid direct contact with skin, eyeand exposure by inhalation. In such case, wash with plenty waterand seek medical attention immediately.These suggestions and data are based on information that we believe to be reliable. They are given forinformation only and in good faith, but conditions and methods of use of our products are beyond ourcontrol. We recommend that the user determine the suitability of our materials and suggestions before usingthem on a commercial scale.July 2013Milky white emulsionGypsumApply single coat of TSN 720 by brush or spray on pretreated surfaceWhen the bond coat becomes tacky, a