在线聊天
Biomass gasification furnace comprises:slicing machine,crushing machine,drying system,the gasification system,control system.Biomass raw material goes through crushing and drying (after drying the moisture content of raw material is less than 5%),then by automatic feeding device transport to the reactor-mouth,by the injection device inject into the reactor for fast gasification.In the thermodynamic condition,the reactor is put into heat carrier gas that gasification required and catalyst pyrolysis generate to combustible gas and tar,under catalyst funvtion,part of tar futher cracked into permanent combustible gas.After gasification,the catalyst and carbon-residue delivery to the regenerative furnace by automatical feeding device,with high temperature heating the regenerated catalyst is returned to the reactor for gasification reaction.Continuous heating of catalyst recycling,improving the thermal efficiency of gas.
The gasified gas is outflow from the high-speed centrifuge reactor(our patent product).This time the gas from centrifuge without dust,tar,can be directly used as clean combustible gass.Combustible gas composition containing CO,H2 and CH4,calorific value up to 3000Kcal/Nm3.
Gasification slag produced by the cyclone separator,can be used as a soil improvement or used as fertilizer and so on.The heat source if waste hear from cyclone separator can be used in raw biomass drying system,improve the utilization of energy.
usage
1, clean and high temperature of combustible gas is suitable for all kinds of thermal furnaces and continuity of boiler heating,such as chemical industry, metallurgy, ceramics, etc
2, suitable for small and medium-sized biomass gas power station construction;
3, can use for central heating supply for residents.
parameter of biomass gasification furnace
Item | Parameter | ||
TY-QHL-500 | TY-QHL-1000 | ||
Furnace size (L×W×H)m | 15×6.0×6.5 | 15×8.0×6.5 | |
Fuel type | Forestry processing residues, twigs, straw, husk and all kinds of livestock and poultry manure
| ||
moisture content % | <30 | ||
After heating moisture content % | <5.0 | ||
Grain size,( mm) | 1.0~3.0 | ||
rated capacity Nm3/h | 300~600 | 1000~1200 | |
Heating value of fuel, Kcal/ Nm3 | 2500~3000 | ||
Heating device output ,kg/h | 500 | 1000 | |
Heating device size(L×W×H)m | 13.5×3.6×5.0 | 15×3.6×5.0 | |
Crushing device output kg/h | 500 | 1000 | |
Total power ,kW | 44 | 53 | |
Project: introduction of biomass gasification-furnace
The supplier: Zhangjiagang City Tianyuan Machine Manufacturing Co., Ltd.
Contact person: Zhao Dabin
Tel:0086-512-58618908
Phone: 0086-13606229771
Fax: 0086-512-58901285
Websit: www.zjgtyjx.com
Address:No. 3,Nanfeng section-road,Nan Feng Development Zone,Zhangjiagang City.Jiangsu China