Cationic Softener Flake                                          

TECHNICAL DATE SHEET

Product basic information                                                          

Item no.:        S-350

Product Name:Cationic softener flake

Introduction:    Cationic flake is fatty acid amides, suitable for all kinds of textile softener.Especially suitable for acrylic fiber and its blended fabric. Impart the fabric with fluffy, soft, smooth feel, the effect of Whiteness of fabrics and colored light is small ,low yellowing. Good antistatic, anti acid and hard water.

Basic Character                                                                    

Appearance:     yellowish to light yellow flake

PH value:          6±1(10% solution)

Solubility:        soluble in water

Ionicity:              cationic

Effective content: 99.9%

Use Area                                                                            

◆ Soft finish of all kinds of textile, especially suitable for acrylic fiber and its blended fabric. Impart the fabric with fluffy, soft, smooth feel, the effect of Whiteness of fabrics and colored light is small ,low yellowing. Good antistatic, anti acid and hard water.

Advantage                                                                        

◆  Impart the fabric with soft, fluffy, smooth, elastic feeling.

◆  Good antistatic properties .anti acid and hard water.

◆  The effect of Whiteness of fabrics and colored light is small.

◆  Especially use for acrylic fiber and its blended wool fabric.

Usage amount for reference                                                          

◆ Dipping Process: 0.3-0.8%(o.w.f) , bath ratio 1:10-15,temperature:40-50℃，15-30 minutes.

◆ Padding Process: 2-3g/L ,temperature 30 ~ 40°C.

Qingdao Dayin Chemicals                                       TDS   Page 1 of 2   

Qingdao Dayin Chemicals Industry CO.,LTD

Tel: 0086-532-84670326    Fax: 0086-532-84670326

Mobile: 0086-15865528060     Email: dye123@qd-dayin.com

Cationic Softener Flake

Dilution                                                                           

◆ Pour the flakes slowly into room temperature water in the proportion of 10%, stir and soak the mixture for 10-20min till flake completely disperse, then stir and heat to 50—60°C until the flakes melt, it need about 1 hour. After observing the flakes are totally dissolved, continually stir the mixture till to get a uniform paste. Then the product can be used.

Storage                                                                            

◆  Store in cool, dry and ventilated warehouse. Take care of heavy pressure to prevent agglomeration. One year of storage period.

Other information                                                                  

◆  This data is based on the research of Qingdao Dayin Chemicals and is believed to be correct, but we cannot guarantee that conditions and methods of you use our company products are exactly same to us, so need to test if it can meet your special applicable requirements before mass production.