Chinese Aluminium Silicate Powder With Good Quality & Competitive Price For Sale

Products description

Using high quality raw material, calcined alumina is being produced in the rotary kiln on the reasonable temperature. with the characteristic of high conversion rate, stable crystallization and low impurity content.

The finished product with excellent performance of high mechanical strength, stable shrinkage rate, good electrical insulation, high wear resistance. and outstanding corrosion resistance.

Uses

 
Silicate aluminum powder is a new type of functional silicate products, it has fine grain, good suspension, high whiteness, etc.As a functional additive, it can be widely used in environmental water based architectural coatings, printing ink, plastic, rubber, leather, printing and dyeing, papermaking and other fields.
Join interior, exterior architectural coatings, printing coating slurry, leather wipe light pulp, alkyd paint, acrylic wall paint, powder coating, white surfacer, road marking paint, and other products, the effect to produce titanium white, save about 15 ~ 25% dosage of titanium pigment, it can reduce the cost of product, and can obviously improve the performance of our products, such as whiteness, dry film covering power, storage stability, weather resistance, wear resistance, scrub resistance, etc.Also can improve the construction performance of the product, such as the lower thermoplastic coating, to improve the surface of the hair sticky, vacuuming, etc.Just a slight thickening, can make the primer to improve its besmear to brush, prevent in vertical flow phenomenon of coating.Mixed with synthesis of ultra-fine aluminum silicate agricultural plastic film, can improve the transmission of light, increase the crop photosynthesis intensity, which can make the crop yield increases by about 8% to 8%.Used in paper industry, can obviously increase the whiteness of paper, to improve the appearance of the product and its service life.
Second, product indicators
appearance
Loose white powder Water (105 ℃, 2 hours) 6-9 ignition loss (800 ℃, 2 h) 7-9
Bulk density (0.20-0.28 kg/liter) water PH (5% water soluble, 9.7 to 10.8
Oil absorption (g / 100 g) or less 120 average particle size (mu) of 1.5 or less
Crystal amorphous whiteness (%) of 96 or higher.