ROCK WOOL BOARD
Introduction
Rock wool felt product, with high-quality basalt as raw material, has a good non-combustibility with melting point above 1000°C, especially in terms of heat insulation, fire proof and reduction and absorption of noise is effective.
Characteristics
1.Non-combustibility,fire proof,pests prevention,corrosion resistance,no asbestos, stable chemical
2. performance, green environmental friendly products, harmless to human body and the environment, easy to carry and transport, low maintenance cost.
3.Rock wool low chloride product safety reached the requirements of ASTM795, applies to stainless steel products
4.This product is elastic,light weighted and could be rolled up and fold.
5.Superfine fiber and good resilience
6. fiberglass blanket, or aluminum foil:Simplex felt,fiber glass cloth sewed felt,aluminum foil felt
7.Highly durable insulation product
8.Able to be used at higher temperatures >600
9.Cost effective Thermal insulation
10.Made from up to 40% recycled content
11.Easy handing and installation
Application:
1. Petroleum, metallurgy, electric power, machinery, chemical industry equipment insulation, for sound-absorbing noise reduction
2. Building partition wall, curtain wall, fire doors, elevator well, roof and retaining heat insulation, for sound-absorbing noise reduction.
3. Industrial furnace heat insulation, oven, large diameter storage tank and heat preservation of the ship, for fire protection.
Data sheet:
Length(mm) | Width(mm) | Thickness(mm) |
1000/1200 | 600/630 | minimum of 40 |
Item | Unit | Index | Standard | |
Density | kg/m3 | 80---200 | GB5480.3 | |
density Allowns thedeviation | % | ±10 | GB5480.3 | |
Fiber Average Diameter | μm | 4-7 | GB5480.4 | |
% | ≤6 | GB5480.5 | ||
water absorption per volume | % | ≤2 | GB/GB16401-1996 | |
Temperature absorption rate | % | ≤1.0 | GB5480.7 | |
Hydrophobicity | % | ≥98 | B10299-88 | |
The thermal shrinkage temperature under load | °C | ≥650 | GB11835-1998 | |
Organic Content | % | ≤4 | GB11835-1998 | |
Compressive Strength(10% compression ratio) | Kpa | ≥40 | GB/T13480-92 | |
Peel Strength | Kpa | ≥14 | DIN52274 | |
Noninflammability | -- | MPS-A | GB5465 | |
Thermal Conductivity(70°C) | w/m.k | ≤0.041 | GB10294-88 | |
Acidity Coefficient |
| ≥1.5 |
| |
Binder Content | % | ≤3.0 |
|