Gas phase method 3 oxidation 2 aluminium AEROXIDE Alu c is AEROSIL adopt similar gas phase method is used to process of BET surface area for 100 + 13 size 13 nano 3 oxidation 2 aluminium.

Physical and chemical data: AEROXIDE Alu C test way

The hydrophilic/hydrophobic hydrophilic

Fluffy white powder in appearance

BET surface area (100 square meters/g)

Primary particle mean diameter grain of 13 nm

Pressure tightness 50

Dry weight loss (105 ° C 2 h) wt % < 5.0

Burning weightlessness (1000 ° C 2 h) wt % < 3.0

Ph 4.5 to 5.5

Silica content wt % < 0.1

3 oxidation 2 aluminium content > 99.6 wt %

Iron oxide content in wt % < 0.2

Titanium oxide content wt % < 0.1

< 0.5 wt % HCL content

Screenings (45 um) in accordance with the Mocker wt % < 0.05

Packing unit 10 kg (net weight)

Product features: highly fragmented and gas phase method of alumina C used as flow aid, PET film adhesion agent, can also be used in fluorescent tubes and light bulb, and environmental protection powder coating used for protection and bonding layer. AEROXIDE Alu C for high quality ink-jet printing paper coatings, also provide paper with high gloss and excellent print quality for advanced powder coating, powder coating can be improved in the volume, an anti-caking effect is good. In high temperature, high humidity environment using powder coating, good storage. Content is in commonly 0.1 0.2%, when the finished sieve to join the best effect. Alumina C can improve the electrical performance of the powder, especially when using friction charged spray, can significantly improve powder powder rate and solve the problem of blind Angle, at the same time has no effect on powder coating gloss. Powder coating process requirement formula has good liquidity. Degussa type gas phase silica and alumina after join additive is series of products, it has such performance advantages. Our series of products designed to achieve the best liquidity with, no matter what type are use of resin binders for apply. Gas phase alumina with positive charge, make its can be used as a friction charged powder coating formula of effective additives. Both epoxy, polyester TGIC polyester mixture or other resin systems. Series of various products to provide liquidity in friction coating with excellent combination of charge characteristics. Suggested content: 0.1% - 0.2% of nano aluminum oxide is widely used in four areas:

The first: powder coatings Powder coating resistance to agglomerate, improve on powder rate, improve the powder charge

The second: fluorescent tubes and light bulb energy-saving lamp industry agglomeration, phosphor fertilizer sticking prevention

Third: high quality ink-jet printing paper coatings, paper coating for paper with high gloss and excellent print quality

Fourth: lithium new coating used in lithium batteries coating industry, thermal conductivity, heat dissipation and protection