Chat online
The machine has got the national patent, and the factory has its own independent knowledge property rights. This machine can be used to dig holes, set poles, dig trenches, pay-off, bulldoze, winch and drag. It's called the fully automatic multifunction machine.It uses the drive 2 0r drive 4 tractor power as its power source and has a good filed work characteristic. The front-loading structure, fully hydraulic power, high strength alloy bit, torsion-proof and tensile strength spiral drill pipe, large-tonnage telescopic crane, all these devices make sure the operation is safety and flexible. One person can operate the machine easily and conveniently, which greatly improve the
working efficiency. Drill, drill stem and supported arm are assembled in a special way, which makes it more convenient to disassemble. It makes the long-distance transportation and short-distance movement easier.
Matters needing attention before use :(must refuel before start the machine)
1. Refuel the tractor engine (Gear oil, diesel oil, hydraulic oil, cooling liquid)
2. Refuel the tractor digging system (hydraulic oil) gear oil (High-speed butter)
3.Refuel each joint (butter) once a working day
4.Empty running are not allowed to start walking hydraulic system.
Switch off the hVdraulic system before the vehicle stoYpped. Open the hydraulic system 30 minutes early before work in winter, 20 minutes;early in summer. Steadily accelerate from slow to fast.
5.Single operation lever is the reverse rotation lever.
6.Nut 27 is a pressure regulating valve.
7.operating lever is the big arm lifting rod.
8.operating lever is to control the drill bit to move front or back.
9.operating lever is the vertical bar controller.
10.Max. lifting weight: 3-4t.
11.Heavy lifting from the host cannot be more than 7meters.
Note: when using the main head, do not make a sudden pause, if breaks,it is not under warranty.
Drilling depth:1-6m
drilling capacity: 300-1200mm
standrad drilling pole: 300-500mm
ascending forms: hydraulic ascenion
drilling time: 40s
sutiable geological layer: loess formation, varved clay, paper clay, tundra, pebbly sand bed, weathered granite horizon
not suitable layer: rock, building backfill garbage,all-sand bed, living garbage layer
operation:one people
spare parts: drill head,
working life of the drill head : one year
1: What kind of drilling work can it do?
Pile driver Mainly applies to drill wells for farm irrigation wells, garden irrigation wells, drilling water wells, geothermal wells. Geological explorations, sample taking, pilling driving drill.
2: What are the max. depth and the max. diameter of holes allowed for this drill rig?
300-1200mm diameter and 6m depth are available. Here we sincerely inform that the final depth and diameter will subject to your special local working strata and drilling experience.
3: What kind of working strata is OK ?
Soil, sandy, clay, sediment, soft rocks, etc. Certainly, the special strata need different drilling bits.
4: What is your advantage over this drill?
Economical and worthy to owned by any family, company. Practical and efficient by drilling speed of drilling a hole in 1 minute. Easy operate and maintain by only two workers.
